Home > Gate Openers > Gate Opener Accessories >

ALEKOŽ LM149 24V Electric Lock for Swing Gate Openers
ALEKO® LM149 24V Electric Lock for Swing Gate Openers
ALEKOŽ LM149 24V Electric Lock for Swing Gate Openers
 
Our Price: $79.00

Quantity in Stock:34
Availability:: Usually Ships in 24 Hours
Product Code: LM14924V-WG
Qty:

Description What is in the box Technical Specifications
 

ALEKOŽ LM149 24V Electric Lock for Swing Gate Openers

ALEKOŽ Series AS/GG 450/600/650/850/900/1200/1300/1800

and will work with any 24V Gate Opener


For added security. Unlocks and locks automatically as gates open and close. Comes with a keypad manual release. Recommended for gates over 7 ft. long. Ideal for animal enclosures or high wind areas. Compatible with any 24V gate opener system.
IN THE PACKAGE:
  • Electric Lock unlocks and locks gates automatically as they open and close.
  • Recommended for gates over 7 ft. long.
  • Ideal for animal enclosures or high wind areas.
  • Compatible with any 24V Swing Gate Openers.

Average Customer Review: 4 of 5 Total Reviews: 2 Write a review.

  2 of 4 people found the following review helpful:
 
electric lock June 6, 2011
Reviewer: westend23@bellsouth.net from Birmingham, AL United States  
This lock will only work if the slave gate is locked into the closed position. If both gates swing to the closed position, what will hold the slave gate?.
I have the solution

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
decent latch February 11, 2011
Reviewer: darren beanard from elgin, SC United States  
This is a solid, very heavy latch. But be prepared to do some modification to the gate or latch to make it fit. This latch is made to fit flat surfaces, but most metal gates are tubular. You will need to spend some time at several hardware stores getting what you need. I have a single swing gate and would have liked to have the electric part fastened to the post, and the striker part fastened to the gate. But there is no way to devise that, which means that the heavy electrical part of the latch has to be fastened to the gate itself putting a lot of weight on the gate and a wire wound through the gate. A simple design change would have made the latch convertable so that you can place the electrical part on the post and install the striker on the gate. That way the lighter weight piece is on the gate and the wire is not wound through the gate itself and not flexing each time the gate swings which will reduce the wear on the wire itself.

Was this review helpful to you?


Browse for more products in the same category as this item:

Gate Openers > Gate Opener Accessories
Gate Openers > Gate Opener Parts
Gate Openers > Gate Opener Accessories > Electric Locks
Gate Openers > Gate Opener Parts > Swing Openers Parts
Gate Openers